Disinfect Surfaces with VS-1000
VS-1000 is a disinfectant registered on the EPA List N for use against SARS-CoV-2 (COVID-19).
VS-1000 is a multi-purpose, germicidal, virucidal, and fungicidal cleaner and deodorizer that disinfects or sanitizes (non-food contact surfaces), cleans, and removes malodors from hard, non-porous, inanimate surfaces.
DIRECTIONS FOR USE:
Hold VS-1000 spray bottle 6-8 inches from desired surface. Thoroughly wet hard, non-porous, inanimate surfaces with VS-1000. Let VS-1000 remain on surface for a minimum of 5 minutes, wipe clean, and allow to air dry.
TYPES OF SURFACES TO DISINFECT WITH VS-1000
VS-1000 may be used on any surface not harmed by water. This list includes but is not limited to:
Protect Surfaces with DefendPro
There is a BIG GAP in
In today’s new normal, proper disinfecting protocols are more important than ever. Disinfecting is great, but the problem lies with what happens in between disinfecting.
Surfaces you disinfect are not protected between disinfection times!
They can become contaminated the next time they are touched, coughed, or sneezed on!
In the fast paced environment we live in, it’s just not realistic to disinfect everything that’s touched every minute of the day.
So, how do you protect surfaces between disinfecting?
Simply By Using DefendPro!
DefendPro is an Antimicrobial Surface Protectant that stays on surfaces, continuously protecting it against microorganisms, mold, and mildew for up to 90 days.
Here’s How DefendPro Works
PLUS it keeps your surfaces protected for up to 90 days!
Hold DefendPro spray bottle 6-8 inches from desired surface. Thoroughly wet hard, non-porous, inanimate surfaces with DefendPro. Let DefendPro remain on surface for a minimum of 5 minutes, wipe clean, and allow to air dry.
In addition to all of the hard surfaces listed for VS-1000, DefendPro can ALSO be used on soft surfaces including, but not limited to:
Footwear & Insoles
ONE BUNDLE INCLUDES:
(1) 32 oz. Bottle of VS-1000
(1) 32 oz. Bottle of DefendPro
*FREE USA SHIPPING*
Frequently Asked Questions
Yes, VS-1000 will kill COVID-19 when following application protocol.
The EPA List N is a list of products with Emerging Viral Pathogens AND Human Coronavirus claims for use against SARS-CoV-2.
VS-1000 has a 5 minute dwell time. Apply VS-1000 to the desired surface and let sit for 5 minutes. After 5 minutes, VS-1000 will have disinfected surfaces and will become inert. Then you may allow surfaces to air dry or wipe away excess product.
VS-1000 may be used on any hard, non-porous, inanimate surfaces not harmed by water (excluding food-contact surfaces.)
Appropriate surfaces include but are not limited to floors, walls, ceilings, pipes, windows, mirrors, sinks, counter tops, tile, stone, grout, doors, fixtures, porcelain, ceramic, enamel, plastic, stainless steel, brass, aluminum, soft metals, painted surfaces, tables, chairs, bed frames, hardware, restrooms, office equipment, gym equipment, automobiles, and more.
Yes, VS-1000 is non-toxic and 100% biodegradable. VS-1000 is meant for external use – do not swallow or use on skin.
No, VS-1000 should not be applied on food-contact surfaces. HOWEVER, the FDA defines food-contact surfaces as surfaces where human food contacts the surface during normal operations such as utensils, pot-stocks, slicers, and cutting boards. These surfaces represent less than 1% of the surfaces in a restaurant and are typically disinfected after each use.
All other areas of a restaurant or kitchen can be treated with VS-1000 (tables, chairs, counters, bars, walls, menus, etc.)
In the unlikely event that VS-1000 freezes during shipment, simply allow it to thaw out at room temperature. Once it’s been thawed out, it will be ready to use!
VS-1000 has a shelf-life of 4 years. Since it’s hydrogen-peroxide based, it will evaporate like alcohol if you leave the lid open for an extended period of time. So, you’ll want to make sure it’s stored with the lid on properly.
Due to EPA restrictions we are unable to say DefendPro kills COVID-19.
Please review the graphic below that explains more about the proven effectiveness of the EPA registered ingredients in DefendPro which are very effective at protecting surfaces against many micro-organisms and bacteria.
(Click the graphic for a larger view in a new window)
DefendPro forms a colorless, odorless, positively charged layer of protection on treated surfaces. You could think of it as a layer of electrically charged grass, which you can’t feel. When a microorganism comes in contact with the treated surface, they “pop” much like a bubble landing on grass.
DefendPro’s electrical charge can’t be felt by human touch, but it assists in neutralizing microorganisms. The good news is that DefendPro doesn’t lose strength when microorganisms land on it, so it is ready to protect against the next microorganisms that land on it.
Properly cleaned and disinfected surfaces treated with VS-1000, will be ready for use once DefendPro has been properly applied and been on surfaces for at least 5 minutes.
The drying time is based on ambient environment, you should anticipate an average of 10 minutes.
Fabrics will take longer to dry. If using a fine mist spray applicator, droplets will reach the surface relatively quickly so any lingering “fog” or “mist” should be minimal upon entry into a room or facility after drying time.
We recommended to re-apply every 30 to 90 days. Independent studies show that treatments can last much longer on the surface, but the use of the surface and the abrasion on the surface will ultimately remove the finish protection.
We set recommendations at 30 days for high-touch point surfaces and 90 days for surfaces that don’t experience too much touch or abrasion.
Ultimately, the customer will decide how often to re-apply based on factors like frequency of surface use and personal preference.
Before reapplying DefendPro, please clean surfaces and then disinfect with VS-1000. Then apply DefendPro again.
DefendPro can be applied on both hard AND soft inanimate surfaces.
It can be used as a final bacteriostatic finish on many surfaces including door knobs, desks, counter tops, fixtures, carpet, laundry, face masks, equipment, non-food contact surfaces, and more. The possibilities are endless.
No, DefendPro should not be applied on food-contact surfaces. HOWEVER, the FDA defines food-contact surfaces as surfaces where human food contacts the surface during normal operations such as utensils, pot-stocks, slicers, and cutting boards. These surfaces represent less than 1% of the surfaces in a restaurant and are typically disinfected after each use.
All other areas of a restaurant or kitchen can be treated with DefendPro (tables, chairs, counters, bars, walls, salt & pepper shakers, menus, etc.)
In the unlikely event that DefendPro freezes during shipment, simply allow it to thaw out at room temperature. Once it’s been thawed out, it will be ready to use!
DefendPro has a shelf-life of 2 years.